Coupling Grease

Why Coupling Grease?
Sufficient lubrication is crucial for satisfactory gear coupling operation. Gear Coupling Grease is specifically made for gear coupling applications to boost coupling life although significantly decreasing maintenance time. Its high viscosity base oil and tackifier mix to keep the grease in spot and reduce separation and it’s in finish compliance with NSI/AGMA 9001-B97 lubrication recommendations.
Coupling Grease is dark brown in shade and manufactured by using a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to higher centrifugal forces usually found in couplings. Bearing or common objective greases usually separate and shed effectiveness resulting from substantial centrifugal forces to the various ingredients at higher rotational speeds. These substantial centrifugal forces encountered in couplings separate the base oil through the thickeners. Hefty thickeners, which have no lubrication qualities, accumulate in the gear tooth mesh spot leading to premature coupling failure. Gear Coupling Grease is developed to remarkably resistant to centrifugal separation of the oil and thickener, which will allow the lubricant to get employed to get a reasonably extended time period of time.
Among the secrets towards the results of Gear Coupling Grease is the variable consistency throughout the operating cycle on the application. The consistency of our gear coupling grease adjustments using the working circumstances. Working with the lubricant below actual support situations leads to the grease to develop into semi-fluid, functionally solash lubricating the dress in surfaces in the coupling. Because the grease cools, it returns towards the original consistency, therefore preventing leakage.
Gear Coupling Grease is available from stock in 14 oz. cartridges, one lb. and 5 lb. cans.
Characteristics
Minimizing of coupling wear
Resistance to water washing
Corrosion and rust protection
Substantial load carrying capabilities
Extended relubrication frequency
Use at temperatures as much as 325° F
Staying in location underneath large speeds
Resistance to centrifugal separation
Reduction in down time & maintenance cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and one. This grease is specially formulated with a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.