Materials Managing Energy UNIT 1
This energy unit is developed for your fork lift marketplace, consisting of very effective gear pump, DC motor, manual raise and reduced valve, tank, ect. The up and down motion are controlled from the lever of your guide release valve, which is equipped with an electrical switch to activate the motor. The lowing pace is controlled by the stress compensated flow management valve.
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean each of the hydraulic elements concerned in advance of set up of the power unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst, which really should also be clean and free of impurities, N46 hydraulic oil is advisable .
four. Oil changing is required after the first one hundred operation hrs, afterwards when every single 3000 hours.
5. The energy unit proven is created to be mounted horizontally.
Material Handling Energy UNIT 2
This energy unit features power up gravity down circuit. Activate the begin solenoid to start the motor to lift the machine. The lowing movement is activated through the solenoid valve together with the lowering pace managed through the pressure compensated flow manage valve. Products of this series might be broadly utilized in the market of logistic devices such as fork lift, mini lift table, and so on.
1. The duty of this energy unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean all of the hydraulic elements concerned ahead of mounting the power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst,which ought to also be clean and cost-free of impurities, N46 hydraulic oil is suggested .
four. Oil changing is needed after the preliminary 100 operation hours,afterwards once every single 3000 hours.
five. The energy unit must be mounted horizontally.